B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System

You looking to find the "B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System" Good news! You can purchase B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System with secure price and compare to view update price on this product. And deals on this product is available only for limited time.

   

Product Feature

• New high-performance compression driver for a smoother frequency response and lower distortion throughout the upper midrange frequencies
• VCA on all three amplifier channels to minimize clipping and distortion at high levels
• FREE dust cover

Product Description

The B-52 Matrix-1000 V2 Speaker System comes with 2 10" 2-way powered satellites and a dedicated powered 15" subwoofer. The Matrix-1000 V2 has a built-in 3-channel 700W power amplifier, 3 independent volume controls, electronic crossover with equalization, and VCA compressor. The circuitry is designed and fine-tuned to integrate all components for the best possible sound. There is no need to tweak or finesse settings on a crossover or compressor to make your system sound great. Simply roll the system into place on its heavy duty casters, plug in the AC, connect the two speaker cables, run two XLR cables to your mixer and you're ready to goBuilt-in 3-channel amplifier The 15" subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all three components, power supply and preamps. The 15" subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms.10" satellite speakersThe B-52 Matrix-1000 V2 satellites are loaded with a custom designed 10" speaker and 1" titanium diaphragm compression driver. The "horn" is a 90 x 60 elliptical waveguide that can be rotated 90 to optimize the dispersion pattern to best suit your particular application. These versatile B-52 speakers are pole-mountable and can sit as stage monitors. They also include 3/8"16 tpi flying hardware for small venue permanent installations. The rounded front of the satellite speaker is a perfect fit for the convex face of the subwoofer, allowing you to stack, roll and transport the entire Matrix-1000 V2 in and out of a venue in record time.Transporting the system To transport the B-52 Matrix-1000 V2, simply set the subwoofer on its casters and place the satellite speakers on to the subwoofer's front panel, facing down. Fasten the satellites with the included locking strap using the handles on either side of the su

B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System Review

This setup is a ridiculously good value of sturdy cabinet construction, and good mid-level drivers.

The default package is missing a few things, so make sure you understand you'll need another $100 or so in accessories:

no stands or tripods
no speaker cables (connected with speakon jacks)
no signal cables (to connect to a mixer) (fullsize XLR)

In addition to picking those up, it would be a good idea to keep some other things in mind: pick up an extension cord rated for 14amps. Position the subwoofer near(less than half a foot) a wall, or angled in a corner. The speaker height on a stand should have the bottom of the cabinet roughly even with the bottom of the nose of the average listener's height.

Most of the consumer Reviews tell that the "B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System" are high quality item. You can read each testimony from consumers to find out cons and pros from B-52 Matrix-1000 V2 700W Active 3-Piece Speaker System ...